Providing High Performance and Efficiency

All units within this range operate on full outside air, and are designed to provide the optimum level of ventilation to meet the building's needs. Internal influences such as process, lighting, occupancy heat gain and building exhaust systems are some of the factors which influence the design criteria.

The 'Pressurair' ^® SR series incorporates the latest advancements in direct fired warm air heating. The included temperature controls are fully modulating, controlled by the latest 'RAPIDNET' microprocessor technology. The combination of a high efficiency burner, intelligent controls and slight building pressure ensures extremely close temperature distribution is achieved throughout the heated area.

Considerable energy savings are provided over conventional systems, with the added advantage of continuous building ventilation during the heating season and 'free cooling' during the warmer summer months.

Some of the many applications of this versatile system include:

• Make up air requirements where general or process extract ventilation is present. Designs ensure all building process or general extracts operate to maximum efficiency while still maintaining a positive building pressure.
• Garages, bus depots, loading bays, etc. Continuous ventilation assists in achieving Indoor Air Quality and minimises the requirements of a separate building ventilation system.
• Heavy industrial areas where air pollution is normally present.
• Cinemas, nightclubs, etc.
• Swimming pools, where ventilation is paramount. Additional features may be included in this instance to improve the overall system efficiency even further.
• Any area where high efficiency general heating is required.

Key advantages for selection from the Rapid SR range include:

• Optimum energy usage.
• High efficiency burner and controls.
• Minimal effect from draughts during external door opening.
• Immediate response to internal temperature drop caused by external influences.
• Continuous building ventilation providing 'Indoor Air Quality'.
• Range of add on options to extend the system flexibility.

Available standard accessories include:

• Filter section to meet customer's specification.
• Outlet distribution heads-two, three or four way.
• Full weather protection for external units.
• Support legs for vertical units.
• Inlet hoods for horizontal units.
• Inlet and outlet attenuation.
• Variable speed drives.
• Inlet and outlet ductwork to suit site requirements.
• Mix section for side recirculation.
• Cooling section (mechanical/evaporative).

An individual Installation, Operating and Maintenance manual is supplied with each unit, incorporating complete details, comprehensive start up/commissioning and servicing instructions, backed by a fully detailed fault finding chart and spares holding.

All models in this range have been tested and approved against Type and Quality Assurance Standards by an ECC notified body, and carry CE Marking, denoting acceptance and certification against ECC Gas Appliance and other directives applicable in the approved countries.

Rapid operates a fully comprehensive and approved Quality Assurance System for the design, manufacture, installation, commissioning and maintenance of all product ranges and are certified to ISO 9001.