The Latest Technological Advances by Rapid have Produced the Most Efficient Solution for Many Heating and Ventilation Problems

This advanced system incorporates an additional feature - patent protected, fully modulating, automatic recirculation and variable mixing system providing optimum performance and energy savings

During the heating period a full eighty percent recirculation is available. The controls continually monitor the heated space and adjust the variable mixing system to provide the exact quantity of outside air, depending on the usage and operation of external building openings.

Considerable energy savings are provided over conventional systems, with the added advantage of continuous building ventilation during the heating season and 'free cooling' during the warmer summer months.

The 'Pressurair' ^® 3000 series incorporates the latest advancements in direct fired warm air heating. The included temperature controls are fully modulating, controlled by the latest 'RAPIDNET' microprocessor technology. With the combination of a high efficiency burner, intelligent controls and slight building pressure, we ensure that extremely close temperature distribution is achieved throughout the heated area.

Some of the many applications of this extremely versatile system include:

• Make up air requirements where general or process extract ventilation is present. Designs ensure all building process or general extracts operate to maximum efficiency while still maintaining a positive building pressure.
• Buildings that have varying extract loads especially benefit from the 3000 series, which automatically and continually balances the air input, maintaining excellent temperature distribution right up to external openings.
• Warehouses and loading areas which have a number of roller doors. The 3000 series ensures comfort levels are maintained right up to each access point.
• Gymnasiums, sports halls and areas with varying occupancy levels. Inside detectors may be used to minimise the ventilation rate until the moment of occupancy.
• Any area where high efficiency general heating is required.

Key advantages for selection from the Rapid 3000 range include:

• Optimum energy usage.
• High efficiency burner and controls.
• Minimal effect from draughts during external door opening.
• Immediate response to internal temperature drop caused by external influences.
• Continuous building ventilation providing 'Indoor Air Quality'.
• Range of add on options to extend the system flexibility.

Available standard accessories include:

• Filter section to meet customer's specification.
• Outlet distribution heads-two, three or four way.
• Full weather protection for external units.
• Support legs for vertical units.
• Inlet hoods for horizontal units.
• Inlet and outlet attenuation.
• Variable speed drives.
• Inlet and outlet ductwork to suit site requirements.
• Mix section for side recirculation.
• Cooling section (mechanical/evaporative).

An individual Installation, Operating and Maintenance manual is supplied with each unit, incorporating complete details, comprehensive start up/commissioning and servicing instructions, backed by a fully detailed fault finding chart and spares holding.

All models in this range have been tested and approved against Type and Quality Assurance Standards by an ECC notified body, and carry CE Marking, denoting acceptance and certification against ECC Gas Appliance and other directives applicable in the approved countries.

Rapid operates a fully comprehensive and approved Quality Assurance System for the design, manufacture, installation, commissioning and maintenance of all product ranges and are certified to ISO 9001.