Thermal Oxidisers

For gaseous and liquid-stream waste

Solutions for destroying volatile organic compounds, process odours and other waste types.

Process Combustion’s UK and world-wide experience with famous name industrial clients embraces vent gases and waste streams from the production and processing of oil & gas, petrochemicals, chemicals, food, glass, pharmaceuticals and the automotive industries.

Waste types include:

  • Liquid and gaseous hydrocarbons
  • Solvent fumes
  • Smoke fumes
  • Inorganic salts
  • Bound nitrogen
  • Halogens
  • Sulphur
  • Acid gases
Thermal Oxidisers / Oxidizers
Thermal Oxidisers / Oxidizers

Direct Fired Thermal Oxidisers

When you have issues of high calorific value waste gas or a liquid stream then the Process Combustion’s Direct Fired Thermal Oxidisers meet the most stringent requirements of the European Solvents Emissions Directive (SED) and the UK’s Waste Incineration Directive.

Designed and built to client’s own specific standards Process Combustion’s solutions ensure that very high concentrations of volatile organic compounds (VOCs) in waste and gas streams can be dealt with effectively and safely. In some cases waste streams can be cleverly injected through the burner system and utilised as a fuel. Added energy saving equipment like waste heat boilers and secondary heat recovery systems can be included to recover heat and be introduced back into the process.

Key benefits of our incinerators include:

  • Can handle very high VOC concentrations
  • Industry beating extremely high VOCs destruction efficiency – up to 99.95%
  • Reacts speedily to high peak concentrations
  • Can be designed to provide constant heat recovery to be used elsewhere in the process.

Recuperative Thermal Oxidisers

Our range of recuperative oxidisers are designed with a very high destructive efficiency, low outlet emissions and can handle varying solvent concentrations.

Primary heat recovery enables the system to be energy efficient. Systems are supplied with a primary heat exchanger to heat the incoming air stream. Additional secondary heat systems can be installed to heat hot oil, water or air required for dryers, ovens and space heaters.

Key benefits of our incinerators include:

  • Handles high to low VOC concentrations
  • Very high destructive capability – up to 99.5%
  • Up to 70% primary heat recovery
  • Secondary heat can be returned to your process
  • Easy to use advanced control system.
Thermal Oxidisers / Oxidizers
Thermal Oxidisers / Oxidizers

Catalytic Thermal Oxidisers

Where the process gas stream has to be free from particulate, catalyst poisons and left-over materials that can mask or affect the catalyst you need a catalytic thermal oxidiser system that operates at significantly lower temperatures than normal thermal oxidisers.

Process Combustion’s solution delivers cost effective catalytic oxidisation to your air pollution needs. In addition our engineers can isolate several catalyst types to maximise the removal efficiency of the VOCs and improve the life expectancy of the catalyst housed within the unit.

Key benefits of our incinerators include:

  • Can handle very high VOC concentrations
  • Industry beating extremely high VOCs destruction efficiency – up to 99.95%
  • Reacts speedily to high peak concentrations
  • Can be designed to provide constant heat recovery to be used elsewhere in the process.

Regenerative Thermal Oxidisers

Process Combustion’s RTOs are available as a range from low-cost two canister packaged units that come to site completely containerised, to bespoke large canister systems with advanced features such as on line bake-out and secondary heat recovery.

All our RTOs offer high destructive efficiency of VOCs combined with superb energy efficiency and low running costs – little or zero fuel in-put. In cases where heat contribution of the VOCs is significant the RTO can release excess energy and redirect it to secondary heat recovery.

Key benefits of our incinerators include:

  • Handles high to low VOC concentrations
  • Very high VOC destruction rate – up to 99.5%
  • Up to 96% primary heat recovery
  • Secondary heat recovery can be installed to heat hot oil, water or air
  • Extremely low fuel costs even at low solvent concentrations
  • Easy to use advanced control systems.
Thermal Oxidisers / Oxidizers

Contact Us

Call us on:
+44 (0) 1423 879944

Enquire Online
G

Brochure Download

Download our Oxidisers Brochure

Download Brochure
|

Case Studies

Discover how we helped our customers

Case Studies